# Two Spindles With Two Wheels on Each
# All Wheel Adjustments are Done From The Front of the Machine
Somaca/CRL's VE2PLUS2 Two Spindle Vertical Edger gives you added edging capability never before attainable with a two spindle edger. The VE2PLUS2 allows you to place two wheels on each spindle. If, for example, most of your production work consists of 1/4 inch (6 millimeter) flat and seam, and 1/2 inch (12 millimeter)pencil edge, both these wheels can be put on the first spindle. This means you can move from one size, or edge configuration to the next by just using the dials and gauges on the front of the machine. You don't have to do a complete wheel change-over. You gain a tremendous savings in labor and production time. To position wheels on the VE2PLUS2, use the digital position readout at each spindle for quick and accurate setup. When you have to change wheels, all your work can be done from the front of the machine. Once again, this saves you labor time. The VE2PLUS2 is ideal for the small to medium size glass shop that needs machine quality edges, but lacks the production to justify a larger machine. It's a compact machine, and is designed to edge the most common range of glass thicknesses and sizes. In fact, Somaca/CRL's VE2PLUS2 is almost like having a four spindle machine for the price of a two.
Glass from 1/8 to 1/2 inch (3 to 12 millimeter) thickness, and from 3-1/2 inch (89 millimeters) in length can be processed. Maximum glass weight is 250 pounds (113 kilograms). Two inch (50.8 millimeters) wide strips over 24 inches 609.6 millimeters) long can also be processed. The machine will produce a polished edge at speeds up to 100 inches (2540 millimeters) per minute.