Forvet FC 16M 1250 Mill X axis unlimited Y axis max.1250 mm. Glass thickness from 3 to 19 mm. Max drilling diameter 65 mm. (70mm optional) Number of spindles 16 (8+8) Spindles rotation speed up to 10,000 rpm Spindles feed 0.2-3 mm per second Milling speed from 3 to 35 mm per second Axes positioning speed 30 m./min. Axes positioning accuracy +/- 0.25 mm/m. Compressed air > 6 BAR (58 PSI) Water pressure > 2 BAR (29 PSI) The FRANCESCA FC 1250 H.O. is a Numerically Controlled (NC) glass working centre capable of performing drilling, countersinking and milling operations on flat glass sheets ranging in thickness from 3 to 19 mm. (25 mm. optional), including out of square pieces. The drilling operation is capable of drilling a maximum diameter of 65 mm. (70 mm. optional) with larger diameters achieved by the milling feature. The useful working field for width is 1250 mm. and theoretically no limits for the glass length. Additionally, there is no inter-axis restriction between holes locations. The machine design features an open front allowing for glass width larger than the machine including sizes of 1800mm, 2000mm and 2500mm that can be loaded and operated with minimum discomfort. The working cycle is completely automatic without any manual intervention. The NC optimises the approaching speed of the heads, controls the glass transport feed, drilling speed and water quantity and adjusts the drill height to compensate for its wear. The operator is required only to provide the hole diameter and its coordinates. Machine specification subject to verification by buyer.
|