X-Y table with Motorized Z-Axis.
Rapid water level control for submerged
Single OMAX MAXJET® 5 Nozzle
Assembly including all necessary
OMAX patented motion control
system incorporating Windows®
600 lb. abrasive hopper.
Black anodized aluminum covers
for X-Axis components.
Ultra-high pressure direct drive pump.
Table cutting length expandable
by two meter increments.
Traction drive coupled with position
feedback from a linear scale results
in high precision.
Footprint 243" x 134" (6170 mm x 3405 mm)
Footprint with optional SRS 288" x 134" (7315 mm x 3405 mm)
Expandable length 2 m increments
Weight (tank empty) 10,000 lbs (4500 kg)
Height 144" (3660 mm)
Operating Weight 35,000 lbs (15900 kg)
(Standard configuration)(See Table A for Extension Kits)
Y Travel 80" (2032 mm)
X Travel 168" (4267 mm)
Expandable Contact local Distributor for details
Table Size 174" x 91" (4419 mm x 2311 mm)
Material Support Slats 4" x 1/8" Galvanized Steel
Material Load 250 lbs/sq. ft. (1,200 kg/sq. meter)
(Optional accessories may reduce travel. Contact OMAX for information.)
Computer Control System
Hardware Personal computer
Control Software Integrated CAD/CAM system directly uses .DXF files
Closed loop, digital drives
Brushless servo motors
Pre-loaded ballscrews with
recirculating ball bearings and
hardened precision ground
ways in Y-Axis
Accuracy of Motion at 70° F
Ball Bar Circularity (Over 12ힿ�)
At Cutting Speed ±0.005" (±0.13 mm)
Repeatability ±0.005" (±0.13 mm)
180 inches per minute standard (Speed can be increased if desired.)
3-Phase, 380-480 VAC ±10%, 50-60 Hz
(Note: Contact OMAX for detailed utility requirements. Pumps are built to meet
UL and CE specifications.)
30HP , 50000 PSI